Get the Look:
Precious Metals Collection
Metallic Semi-Permanents straight from the vault.
Infused with Lustrous Pearl Pigments.
ICED OUT GHOST ROOTS
PULP RIOT PRODUCT NEEDED:
#BlondeAF, Developer, Silversmith, Iced Skater, Ghostblood
PRE-LIGHTENING
Use #BlondeAF with a 1:1.5 ratio, processing for 20-45 minutes at room temperature, checking every 5 minutes until a level 10 is achieved.
COLORING
PRE-TONING: Pre-tone any yellow of out of the hair with Ghostblood. Rough dry the hair.
SECTIONING: Starting in back quadrants, moving towards the front, take small horizontal sections.
ROOTS: Mix of 1:1 Silversmith and Iced Skater on roots and bring down to 1 inch.
MIDS TO ENDS: Blend Silversmith into the root color using fingers, then apply Silversmith through the mids and ends of the hair.
RINSING: Rinse with cool water until water runs clear. Do not shampoo.
STYLING & FINISHING:
Blow dry the hair with a round brush. Finish with a flat iron get hair as straight as possible. Add shine spray if needed.
#BlondeAF, Developer, Silversmith, Iced Skater, Ghostblood
PRE-LIGHTENING
Use #BlondeAF with a 1:1.5 ratio, processing for 20-45 minutes at room temperature, checking every 5 minutes until a level 10 is achieved.
COLORING
PRE-TONING: Pre-tone any yellow of out of the hair with Ghostblood. Rough dry the hair.
SECTIONING: Starting in back quadrants, moving towards the front, take small horizontal sections.
ROOTS: Mix of 1:1 Silversmith and Iced Skater on roots and bring down to 1 inch.
MIDS TO ENDS: Blend Silversmith into the root color using fingers, then apply Silversmith through the mids and ends of the hair.
RINSING: Rinse with cool water until water runs clear. Do not shampoo.
STYLING & FINISHING:
Blow dry the hair with a round brush. Finish with a flat iron get hair as straight as possible. Add shine spray if needed.
Rosy Mullet
PULP RIOT PRODUCT NEEDED:
#BlondeAF, Developer, Molten Metal
PRE-LIGHTENING
Use #BlondeAF with a 1:1.5 ratio, processing for 20-45 minutes at room temperature, checking every 5 minutes until a level 8-10 is achieved. After rinsing, rough dry the hair.
COLORING
COLORING: Global application with Molten Metal.
PROCESSING: Let process for 25-40 minutes.
RINSING: Rinse cool water until water runs clear, do not shampoo.
#BlondeAF, Developer, Molten Metal
PRE-LIGHTENING
Use #BlondeAF with a 1:1.5 ratio, processing for 20-45 minutes at room temperature, checking every 5 minutes until a level 8-10 is achieved. After rinsing, rough dry the hair.
COLORING
COLORING: Global application with Molten Metal.
PROCESSING: Let process for 25-40 minutes.
RINSING: Rinse cool water until water runs clear, do not shampoo.
STYLING & FINISHING
Apply your choice of texturizing product, rough blow dry for added texture.
Metallic Kaleidoscope
PULP RIOT PRODUCT NEEDED:
#BlondeAF, Developer, Silversmith, and Molten Metal.
PRE-LIGHTENING
Use #BlondeAF with a 1:1.5 ratio, processing for 20-45 minutes at room temperature, checking every 5 minutes until a level 9-10 is achieved
COLORING
ROOTS: Shade root with Molten Metal, then at a diagonal blend into Silversmith creating a gradient.
PRO TIP! Create ultra thin sections at ½” thickness.
MIDS: Repeat this pattern down the head ensuring diagonal over direction and blending seamlessly.
PROCESSING: Let process for 25-40 minutes.
RINSING: Rinse with cool water until water runs clear, do not shampoo
STYLING & FINISHING
Blow dry the hair with a round brush. Curl with 1.5” curling iron. Let curls cool and then brush for wave effect. Finish with shine spray if needed.
#BlondeAF, Developer, Silversmith, and Molten Metal.
PRE-LIGHTENING
Use #BlondeAF with a 1:1.5 ratio, processing for 20-45 minutes at room temperature, checking every 5 minutes until a level 9-10 is achieved
COLORING
ROOTS: Shade root with Molten Metal, then at a diagonal blend into Silversmith creating a gradient.
PRO TIP! Create ultra thin sections at ½” thickness.
MIDS: Repeat this pattern down the head ensuring diagonal over direction and blending seamlessly.
PROCESSING: Let process for 25-40 minutes.
RINSING: Rinse with cool water until water runs clear, do not shampoo
STYLING & FINISHING
Blow dry the hair with a round brush. Curl with 1.5” curling iron. Let curls cool and then brush for wave effect. Finish with shine spray if needed.
GLOSSARY
PARTING & SECTIONS
PROFILE: Separates the head from left to right, center forehead to center nape.
RADIAL: Separates the head from front to back, center top of head to the top of both ears.
HORIZONTAL: Parting that is parallel to the horizon.
VERTICAL: Parting that is perpendicular to the horizon.
DIAGONAL BACK: Slanted parting that angles away from the face.
DIAGONAL FORWARD: Slanted parting that angles towards the face.
TOP CROWN: Top of the center of the head.
MID CROWN: Mid point of the top and low crown.
LOW CROWN: Central point where growth pattern begins; where the head begins to curve.
HIGH RECESSION: Center part of the head, where the profile begins.
MID RECESSION: Point where hairline tends to dip, right above the brow bone.
LOW RECESSION: Horizontal to the corner of the hair, located at the center of the sideburn.
OCCIPITAL BONE: Region of the lower back of the head, horizontal to middle of the ear.
NAPE: Lower portion of the head.
FRONTAL BONE: Approximately 2 inches away from the front of the hairline.
WEAVES & APPLICATION
PLACEMENT: 2-3 even weaves to create a bold color placement and a defined stream of color.
SLICE: A thin section of hair; can be taken in vertical, horizontal, or diagonal direction.
PROFILE: Separates the head from left to right, center forehead to center nape.
RADIAL: Separates the head from front to back, center top of head to the top of both ears.
HORIZONTAL: Parting that is parallel to the horizon.
VERTICAL: Parting that is perpendicular to the horizon.
DIAGONAL BACK: Slanted parting that angles away from the face.
DIAGONAL FORWARD: Slanted parting that angles towards the face.
TOP CROWN: Top of the center of the head.
MID CROWN: Mid point of the top and low crown.
LOW CROWN: Central point where growth pattern begins; where the head begins to curve.
HIGH RECESSION: Center part of the head, where the profile begins.
MID RECESSION: Point where hairline tends to dip, right above the brow bone.
LOW RECESSION: Horizontal to the corner of the hair, located at the center of the sideburn.
OCCIPITAL BONE: Region of the lower back of the head, horizontal to middle of the ear.
NAPE: Lower portion of the head.
FRONTAL BONE: Approximately 2 inches away from the front of the hairline.
WEAVES & APPLICATION
PLACEMENT: 2-3 even weaves to create a bold color placement and a defined stream of color.
SLICE: A thin section of hair; can be taken in vertical, horizontal, or diagonal direction.